Telephone Self-diagnostic System (TSS-1000)
KNTECH Telephone Management System is design for control office to monitor the Emergency Call Pointin real time to make sure all the phone station are in good working status. Ensure the control office knowimmediately if one telephone broken and can send someone out to repair it.
TSS-1000 is operating basis on Windows software package use on a PC having the Microsoft Windows. Consist of one windows software + the Emergency call point KNSP-19. All the Emergency Call Point devices have a monitoring and self-diagnostic functionality. Including automatic self-test of microphone and loudspeaker with configurable plan for how often this self-test runs automatically.
At Least every 24 hours, all the Emergency Call Point shall send their health/fault status to the control room TSS-1000 to display the status at the control room. This data also be available to any relevant subscriber of monitoring data as for maintenance purpose.
Details on symbols, icons and color codes to identify objects monitoring status are designed for Employer’s easy operation.
The system is highly reliable. Simply installation and Operation. Just running the TSS-1000 in your computer.
Phone call is higher priority while perform a self-checking task.
The reomote testing and programmable include below details:
Self Monitoring and diagnose
The telephone will report to the TSS-1000 in real time when below happens:
a. Keypad or emergency call button get stucked.
b. Handset microphone or receiver broken, or handset cord broken.
c. Ring indicator LED broken．
d. Buzzer broken．
e. Telephone box been opened
|Model||KNSP-19 Telephone with Diagnostic System|
|Construction||Robust aluminium alloy die-cast body|
|Operating Temperature||-25°F to +158°F/ -40℃ to +70℃|
|Relative Humidity||Up to 95% non-condensing|
|Protection||IP66, vandal-resistant and water-resistant design|
|Communication||Full duplex 2-way handset communication|
|Call Control Signaling||SIP Info(DTMF), RFC 2833(DTMF)|
|Audio Codes||G.711, G.722, G.729|
|Power||Power over Ethernet, IEEE802.3af, Class 0 Local power, 12VDc,Idle 2W, Max 10W|
|Auxiliary Contacts||1 Aux Output, dry contact|
|Load: Resistive load|
|Rated load:0.3 A at 125 VAC; 1 A at 30 VDC|
|Rated carry current:1A|
|Max.switching voltage:125 VAC,60VDC|
|Network||10/100 BaseTX Ethernet, RJ45 connectors, Cat5e or better|
|IP Protocols||IPv4, TCP, UDP, TFTP, RTP, RTCP, DHCP, SIP|
|LAN Protocols||Power over Ethernet(PoE,802.3af), WLAN(IEEE 802.3af), Network Access|
|Control(IEEE 802.1x),STP(IEEE 802.1d), RSTP(IEEE 802.1d-2004)|
|Programming||Non-volatile flash memory programming and configuration through Web GUI|
|Management and Operation||DHCP and static IP, remote automatic software upgrade, centralized monitoring,status LED|
|Echo cancellation code||G.167/G.168|
|Keypad||0~9 free dial, last number redial, speed dail 1 and speed dial 2|