Santak PT3000 series UPS is a new generation UPS providing professional uninterruptible power supply to critical equipment.
PT3000 series UPS use the newest electronic components and topology to enhance UPS efficiency, saving customers’ power cost.
It also provides full of optional accessories and intelligent management solution for different application.
Low loss and high power density
The output power factor of the whole series is 1.
The efficiency in double conversion mode of 20kVA is up to 96%.
The height of rack installation is only 3U, and the depth is less than 600mm.
Programmable output socket
PT3000 series UPS provides one group programmable output socket.
Customer can configure the output socket turn on and turn off delay time.
With this function, customer can turn on and shutdown different loads in sequence.
Shutdown the noncritical load in battery mode to extend the UPS backup time for critical load.
Strong environmental adaptability
PT3000 series UPS adopts active power factor correction technology, which decrease the harmonic pollution to the power grid.
The circuit boards are coating for dust-proof and anticorrosion to adapt the harsher environment.
50°C high operation temperature.
A variety of input and output configuration, the 20KVA UPS input and output phase can be adjusted to 1:1/1:3/3:1/3:3 according to the actual situation on site. Suitable for rack and tower installation.
Friendly human machine interface
Doc matrix LCD show more information of UPS parameters and status. Stand offer input and output dry contact terminal, EPO terminal, USB, RS232 and intelligent card slot.
Intelligent management
Santak intelligent power management software can monitor and manage multiple UPS.
The software is compatible with mainstream virtualization operating systems, such as VMware, Microsoft HyperV/SCVMM.
Perform the automatic shutdown of the physical host and the automatic migration of a virtualized cluster when the configurated condition is triggered.
English
中文版
français
русский
Español
عربى