This Remote VoIP amplifier units is IP-based power amplifier. The units is
connected to the central exchange unit via Ethernet. Copper CAT5 or CAT6 or fiber
cable. The amplifier is a Class D power amplifier due to its especially high efficiency,
low power consumption and long life.
The remote IP-based power amplifier is integrated speaker monitoring. Speaker
circuits are to be continuously monitored for short circuit, earth leakage, and line
interruption. Speakers is allowed navigation through the intuitive user interface.
The user is be able to define settings and make changes using the integrated web
interface.
VoIP SIP 2.0
IP amplifier Self-diagnosis.
Line Monitoring between amplifier and intercom server and speakers
Display and function keys at the front of the unit
Up to 4 simultaneous and independent audio channels per unit
Up to 8 integrated, selectively addressable speaker circuits
Integrated speaker line monitoring
Integrated web interface
Intelligent N+1 backup control
Freely programmable
Integrated monitoring functions (short circuit, excess temperature, voltage failure, function monitoring)
Distortion factor < 0.5% at rated power
Optimized according to the EN 60849 standard “Sound systems for emergency purposes” Upon special requirement.